Kyocera SB-2J0-0024-B033 1 free download

File name SB-2J0-0024-B033_1.pdf

(Revised Issue 1) (Page.1/5) Service Bulletin Ref. No. 2J0-0024 (B033) May 31, 2011 Subject Upgrade of the System Firmware (Ver.007.016) FS-2020_3920_4020DN_07.00.0010_(2010-12-20) Model FS-2020D, FS-3920DN, FS-4020DN This time, the description with (-->) was revised from the previous information. P.2 The serial numbers of the affected machines were added. Topic The firmware was upgraded as follows. Content of Changes Item Details CTL. No. F/W 1 Measure against the If the time zone was set to "-3:00 Brasilia" from Command Center, 519928 SYSTEM panel lockup after the network might not respond and the panel might be locked up. setting time zone Therefore, this was corrected. 2 Change of the Digital The term used on the service status page was changed from "Digital SYSTEM Dot Coverage display Dot Coverage" to "Print Coverage". on the status page - The coverage is simply converted with the area image ratio based on the current dot number data so that the accuracy as the reference value of the toner consumption can be improved. Precaution) - When upgrading the firmware, the Digital Dot Coverage data will be reset due to the different way of calculation. If you need old print coverage report, please print out Service Status Page before updating the firmware. [FS-2020D] Program No. Check SUM Ver. Status Date Current Ver. Remark SYSTEM 2J0_3000007016 d290 007.016 2010/12/20 006.002 <-- New upgrade ENGINE 2J0_1000004002 36DE 004.002 - - - [FS-3920DN] Program No. Check SUM Ver. Status Date Current Ver. Remark SYSTEM 2J0_3000007016 d290 007.016 2010/12/20 006.002 <-- New upgrade ENGINE 2J1_1000004002 5602 004.002 - - - [FS-4020DN] Program No. Check SUM Ver. Status Date Current Ver. Remark SYSTEM 2J0_3000007016 d290 007.016 2010/12/20